Are you facing a brother
printer doesn't recognize ink cartridge issue? When you try installing
a new ink cartridge sometimes your brother printer may deny detecting it.
Hence, this issue is very common when setting up a new printer or refills your
printer ink cartridge. As we know the brother printer includes lots of
features, and because of this sometimes it fails in detecting the ink
cartridge. The error happens usually with all the printers, and if your printer
is having the same issue, don’t we got you covered.
This usually occurs either if the cartridge is replaced before
the printer asks you to replace or when the cartridge is replaced while the
printer is off. So, remember whenever replacing or installing the cartridge for
the first time, never do it while the printer is off. In the event when brother printer ink cartridge not detected
that you have replaced, remove ALL cartridges. After this, install them one by
one and close the door, then your printer will ask “Did you replace the Black
Cartridge?”
In this blog, you will find the possible causes, as well as a
solution to rectify the issue.
Brother Printer Doesn't Recognize Ink Cartridge – Causes
When your printer shoes this issue there can be any reason
behind it. These reasons may also include anything from running slow, low-ink
cartridge to the wrong cartridge installation.
If you have installed the cartridge when the printer was closed,
then you will face such a problem.
Sometimes the cartridge issue also happens when if you have
bought any faulted printer. Thus for this, you have to consult with the
manufacturer. Until the issue is not solved your printer won’t work. So,
without wasting more time, let us jump to the possible solutions for this.
What To Do When: Brother Printer Ink Cartridge Not Detected
The brother printer won’t detect issue will not get solved until
you perform some troubleshooting steps. Hence, follow the below steps to
rectify the issue.
1.
Power off the printer and unplug it
2.
Plug-in the power cord and switch it on
3.
If the ink cartridge not detected issue comes again, try
establishing which color it is triggering
4.
You can detect this on printer LCD with recognition error
5.
If you can’t see any color mentioned, try scrolling down the LCD
Note: If you are unable to find any ink error, then try printing
a document may be the problem is sorted already. Sometimes switching printer
off/on may clear the issue.
1.
Open the printer cover and check all the ink cartridges
2.
Check if they are all installed in the right position and are
properly aligned
3.
Remove all the cartridge from the printer, and check if there is
an issue with their chips
4.
Ensure that none of the chips have fallen off
5.
If any ink cartridge is showing ink out, you can fix it with
chip resetter
6.
But if you are using any old model of the printer then you need
to replace 2-3 times in a row
8.
Don’t give up, the issue will get solved- “Use installed ink
cartridge?” then you easily proceed with your work.
When cartridge error is still there…
If none of the above steps worked for you and you are getting
this trouble till now, then proceed with the following steps.
1.
Ensure that you have replaced the same colored ink which was
solving error
2.
If there are more low-ink cartridge replace them as well
3.
Remove the cartridge from the printer and power OFF the printer
4.
Wait for 1-2 minutes and switch on your printer
5.
Install one cartridge at a time
6.
Now close the cartridge door and press the ink button
7.
Wait for few seconds until your printer recognizes it
8.
If your printer successful recognize the cartridge then do the
same with other cartridges as well
The above steps are enough to solve the brother printer doesn't
recognize the ink cartridge issue. However, after performing all the steps, if
still facing the issue, then you must contact experts. Connect with brother
printer experts to get the best solution for the error.
